craigslist | tools in tallahassee

TRAILER (NW TALLAHASSEE) $100

2008-10-13T14:20:04-04:00

4' x 8' trailer with 1' sides. Rough to look upon, but gets the job done. Takes 1 7/8" - 2" ball. Steel frame, wood bottom. Our hauling days are over.

Troy built Pony tractor 42" bed, 17.5hrs power, 2 years (7793 MaClean Rd. TLH, FL) $350

2008-10-13T13:01:54-04:00

Runs Great in Very Good Condition.

Needs a new Belt, and one new Blade.

At Lowes Blade cost $40
Item # 77414
Model # 77414

and Belt cost $40
Item # 41449
Model # OEM-754-04045

Must Sell Contact # 850-591-4857

DeWALT Heavy-Duty 12 In. Double-Bevel Sliding Compound Miter Saw (7793 Maclean Rd. TLH, FL.) $350

2008-10-13T12:50:22-04:00

This SAW Normally sells @ DeWALT Heavy-Duty 12 In. Double-Bevel Sliding Compound Miter Saw
Model DW718
$679.00/EA Each

Powerful 15 Amp, 3,600 RPM motor provides power and extended durability. Adjustable stainless steel miter detent with 10 positive delivers repeatable accuracy and worksite durability. Precise Miter system and machined based fence support deliver increased cutting accuracy. Exclusive back fence design delivers ability to cut 2 x 16 dimensional lumber at 90 degrees and 2 x 12 at 45 degrees. Tall sliding fences support crown molding up to 6-5/8 In. vertically nested and base molding up 6-1/2 In. vertically against the fence while easily sliding out of the way for bevel cuts. Designed for use with the DW7187 DeWALT Adjustable Miter Saw Laser System which delivers visibility of the cutting path.

* Adjustable stainless steel miter detent plate with 10 positive stops delivers repeatable accuracy and worksite durability
* Exclusive back fence design delivers ability to cut 2 x 16 dimensional lumber at 90 degrees and 2 x 12 at 45 degrees
* Single level action double bevel design allows saw to easily bevel left and right 0 - 48 degrees left and right with positive stops at 0, 22.5, 33.9, and 45 In. both directions
* Camlock miter handle with detent override deliver quick and accurate miter angles
* Designed for use with the DW7187 DeWALT Adjustable Miter Saw Laser System which delivers visibility of the cutting path
* Independently certified to applicable standards
* MFG Brand Name : DeWALT
* MFG Model # : DW718
* MFG Part # : DW718

Contact # 850-591-4857

DeWalt 18 V Xrp 6 Pc. Tool Set (7793 Maclean Rd, Tlh, FL) $300

2008-10-13T12:44:58-04:00

Normally sells for $625 at HomeDepot , Extra Battery and Dual Charger

This 6 pc. tool set comes with our top of the line 18V XRP products. The DC988 XRP 1/2 In. Hammerdrill/ Drill driver provides 500 In./Lbs. of torque and a max rpm of 2000 due to the patented 3 speed all metal transmission. The DC390 XRP� 18V circular saw with 6-1/2 In. 16-tooth carbide blade and rip fence can cut 2 X 4's at a 45 degree angle in a single pass. The DC385 XRP� 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. The DW056 18V impact driver with 1,170 in-lbs of maximum torque and the DC410 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applications.

* DC390 18V circular saw with 6 1/2 In. 16 tooth carbide blade and rip fence
* DC385 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change
* DW056 18V impact driver, DC410 18V cut off tool, DW919 18V flexible floodlight . Includes 2 batteries, charger, accessories and a contractor bag
* DeWalt tools and accessories deliver the ultimate combination of power, performance and durability for the demanding PRO.
* MFG Brand Name : DeWalt
* MFG Model # : DC6KTGA
* MFG Part # : DC6KTGA
* Tool Specs. : N/A

Contact # 850-591-4857

24 volt bosch drill,saw, flash light ,case (Tallahassee) $150

2008-10-13T11:27:38-04:00

24 volt bosch drill,saw, flash light ,case. great condition paid over 450 at lowes.

www.allpowertools4less.com (cut and paste url)

my 6x12 enclosed trailer for your equipment trailer (Valdosta) $1800

2008-10-13T04:10:43-04:00

6x12 Southwest Expressline enclosed. I need a solid dual-axle flat trailer for hauling my vehicle.

sand blaster (crawfordville) $80

2008-10-12T21:45:26-04:00

brand new never used 850-926-3280 aft.6:00 pm

heater (crawfordville) $30

2008-10-12T21:40:24-04:00

house heater or camp heater works call 850-926-3280 aft.6:00pm

chainsaw (crawfordville) $25

2008-10-12T21:37:38-04:00

very little use been sitting up won't run call 850-926-3280 aft.6:00pm

heater (crawfordville) $150

2008-10-12T21:35:03-04:00

dayton karosine heater works good 110,000 btu call 850-926-3280 aft.6:00pm

generator (crawfordville) $200

2008-10-12T21:26:09-04:00

5250 power back generator works good call 850-926-3280 aft.6:00 pm

DeWALT 9.6 DRILL &FLASHLIGHT (TALLY) $65

2008-10-12T20:20:53-04:00

LIKE NEW ALL WORKS CALL 210-2275

10" table saw with wooden stand and locking castor wheels (north-east Tallahassee) $85

2008-10-12T16:22:24-04:00

10" table saw and wooden rolling stand. Originally purchased from Lowe's. Good working condition. Includes extra blade, wrench, instruction manual, push stick, fence and miter gauge. Blade raises and lowers by crank wheel and tilts in the same way. This saw has seen some use but works fine. I upgraded to a larger unit. Call if interested and I can arrange to let you look at it evenings or weekends. 229-224-4116. This is a GA cell number but I live in NE Tallahassee. Kevin.

table saw joiner (quincy) $500

2008-10-12T15:35:48-04:00

this is shop grade tools.delta rockwell 12"or14"table saw 3phase i have it so it will run on 220.it has a biesmeyre fence on it.lumder and plywood blabes,dado blades.500.also delta rockwell joiner 5 foot bed 300.ask for james850-509-3436

tools (Tallahassee Fl) $75

2008-10-12T14:02:57-04:00

Four 16 ft. aluminum extension ladders, good condition. $75.00 for all.- 850 877 2056

Bandsaw with Riser Block-Woodworkers (Pinetta, Florida) $400

2008-10-12T09:32:58-04:00

Rockwell like 14" Bandsaw with Riser Block and Cool Blocks

Part of Moving Sale.

Comes with Custom Extension Table

For Information Call: 850-929-2074

Pinetta, just south of Valdosta

More for sale at: http://www.3ws.us/movingsale.html

Custom TableSaw/RouterTable (Northen Madison County-Pinetta)

2008-10-12T09:20:59-04:00

Tablesaw/router table combo which I designed and built is being sold as part of a moving sale.

Base is a Craftsman 1 HP Contractor's Saw. As constructed will handle crosscutting a 4x8 sheet of plywood.+ Comes with a 42" Biesemeyer Fence with 54" side feed tubes.

Price is dependent on whether you want the 3 HP 1/2" Hitachi plunge router that I use with the saw.

Without the Router $500. With the Router $675. If you know what the price of the router and Biesemeyer fence is then you know what a buy this is.

For details and information call: 850-929-2074

Chainsaw (tallahassee) $100

2008-10-11T19:27:52-04:00

chainsaw mint condition butt it has a dull blade.
runs great!!!
call-941-234-3521

Diamond Plated truck tool box (Greensboro) $100

2008-10-11T13:22:09-04:00

I have a diamond plated truck tool box that will fit a stepside Ford Ranger or smaller truck. It is a bat winged style box. It's in very good condition (no rust, marks or scratches). It doesn't leak. I have the to key for box.

craftsman drill (Tallahassee) $80

2008-10-11T11:32:12-04:00

craftsman drill, 14.4volt, charger,laser red light,hardly used, must sell.

http://www.justools.info (cut and paste url)

Clarke 180 Amp 220v Welder w/ gas tank (Tallahassee) $500

2008-10-11T11:13:41-04:00

This welder has been used about 10 times all small stuff, havent even finished my first spool. This welder is a gas and no gas welder. Includes welder cart from clarke, and gas tank. The tank is a large tank w/ argon included. I belive it is an 80 cu ft tank. I also have a great auto dimming helmet avilable it has a big veiwing window and works great, If you nevenr had an auto dimming helemt your missing out big time. This is additional for $100. I spent 675 for the welder about 1 and half years ago. i paid 190 on the helmet. Due to its size and weight i recommend pick only. im welling to drop off if its not to much out of the way. Welder and helmet work like new, and demos are posible. the pictures in add are not of my welder, but they are the same model of welder and cart, i also have every thing thats in the pictures except the mask shown.

repeat to be clear, mask is not included in the 500$ and it is not the one in the picture of the welder. it is the one on its own picture. it's a astro 8077. here are the masks spec's � Larger viewing area: 96MM x 62MM � German made lens � Automatically changes filter screen from clear to dark in 1/20,000 Sec. � Variable shade adjustment - 9-13 DIN � UV/IR Protection: Up To DIN 16 At All Times � Great for use with MIG/MAG, TIG & ARC Welding � Operator can adjust the time the filter returns from dark to clear state � Automatic Power On / Off, no button to push � Utilizes high performance solar cells as power supply � Battery lifetime up to 4000 hours before low battery alarming � Full face and front of neck protection � Specially designed headband for greater comfort

contact kyle at 813-817-0696. 8am-10:30pm or email me at sweet_deal@msn.com

Neo Socket

Truck Tool Box (TALLAHASSEE) $150

2008-10-11T01:07:10-04:00

UWF SINGLE LID
DEEP WELL W/SLIDE TRAY,FULL SIZE PICK UP TRUCK BED TOOL BOX,
LEAVE MESSAGE WILL RETURN YOUR CALL.850-562-2538

OTC Solarity 4 Channel Scope /For sale or Trade (Tallahassee, Fl.) $1500

2008-10-10T20:30:26-04:00

I am selling my new scope, it has only been used a couple of times. I have gotten out of doing mechanic work and dont need it anymore. I bought it new for almost $5000.00. It is a steal for $1500.00/obo, I am willing to trade for a good boat as well. Please contact me for all of the information about it and all that comes with it.

Misc, Tools (Talla)

2008-10-10T14:56:38-04:00

Old Delta Sawbuck. Works but need a bit of care 50.00
Sanpper Comm. Weed Eater 50.00
2 Paslode airless framing nailers w/cases and batts. 100.00 ea
1 Paslode "old style" finish nailer w/case and 2 batts 75.00
Senco Dura spin DS-300 screw gun attachment for decks
w or w/o drill Call
DeWalt 18v Cordless drill and circ saw. Both have cases
One charger and two batteries 125.00
16 gal. Sears wet/dry vac 20.00
2 used pair of pump jacks for 4 x 4 posts 50.00 set

Call David at: 545-9692

torches, welder, commercial compressor, exhaust fan (leon county) $1500

2008-10-10T14:49:56-04:00

cutting torches 250-

welder with 75' heavy leads 250-

2.5hp exhaust booth fan 250-

5hp commercial compressor 750-

will consider trades for items of interest to shooting/outdoor Enthusiast

Winch for sale - (tallahassee) $60

2008-10-10T14:24:53-04:00

must sell please call
656-8137

PRESSURE WASHER FOR CHEAP (CRAWFORDVILLE) $150

2008-10-10T13:45:11-04:00

I bought this pressure washer at Walmart back in july. But only used twice. Sells for $200.00 at Walmart.

Brute 2100 PSI / 1.9 GPM Gas Powered Pressure Washer
* 2100PSI and 1.9GPM
* Briggs & Stratton 500 series engine
* 5.00 ft.-lbs. gross torque and 158cc
* Maintenance-free axial camp pump
* Easy Start technology
* 0- to 40-degrees adjustable spray nozzle
* Pin-point to wide-fan spray
* High to low pressure
* Cleaning detergent injection siphon hose
* 25' high pressure hose

5500 LBS AUTO LIFT (LAKE JACKSON) $1200

2008-10-10T10:02:40-04:00

USED 5500LBS AUTOMOTIVE SHOP LIFT .WORKS GREAT NO MORE WORKING ON THE GROUND.CALL DOUG AT 850-562-7222

AUTO TRANSMISSION DYNO (TALLAHASSEE) $2500

2008-10-10T10:02:13-04:00

FULL SIZE AUTOMATIC TRANSMISSION DYNO. TEST TRANSMISSIONS OUT OF THE CAR OR TRUCK BEFORE INSTALATION. THIS DYNO USES A 4CYLINDER ENGINE FOR POWER. TO MUCH TO TELL IN AN AD MUST SEE CALL DOUG AT 850-562-7222.

Milwaukee right angle side grinder (TALLAHASSEE) $60

2008-10-10T08:11:01-04:00

This is a Milwaukee brand side grinder. It was used to restore my Uncle's boat. It needs a new project!! It is a 120v and has a strong motor. Works great! If you are interested in it call Wendy at 264-5446 or e-mail me at Wendyb1972@gmail.com. I am asking $60 but will consider all offers. THANKS

Pressure Washer and Water Tank (Tallahassee) $250

2008-10-10T00:23:51-04:00

I am selling a 11hp Honda Pressure Washer and a 80 gallon water tank. Will also include 50' hose and pressure gun. Was used for mobile detailing. The only problem is the gas tank for the pressure washer is missing. Perfect working condition. Call at 786-229-8451

Mouse Sander $20 (Mahan and Miccousoukee) $20

2008-10-09T16:54:48-04:00

I have a mouse sander with case. Some attatchments.

welder, torches, exhaust fan, pressure washer, compressor

2008-10-09T12:48:42-04:00

new 225 amp ac/dc stick welder w/ heavy 75' leads. 250-

2.5 hp 110v booth exhaust fan, 250-

general 2.2gpm 1500psi pressure washer 220v electric with 100' on reel. 250-

airspeed commercial 2 stage air compressor 16cfm@90 80 gal upright 750-

cutting torches on dolly 3' tanks, 50' lines 250-

904-891-0371

TECH Electronic Technician WORKING Tools TEST Equipment (Tallahassee) $100

2008-10-09T12:46:59-04:00

All Electronic Technician Tools TEST EQUIPMENT work & all for $100 and your welcome to come over and test
1. Fluke 75 DIGITAL Multimeter
2. Micronta Analog Meter
3. Heat Shrink Gun
4. Duster
5. Weller Soldering Gun iron
6. Table work bench Magnifying Light
7. Wire Strippers and other Pliers
8 Misc items shown

Pickup only on Apalachee Pkwy Tallahassee-Call 284-2453 Area code 850

12 inch Dewalt Miter Saw (Tallahassee) $600

2008-10-08T12:18:47-04:00

Was bought in 2007, has only been used twice, excellent condition Please contact Erik at 850-508-0067

Vertical Milling Machine & Metal Lathe (Tallahassee) $6500

2008-10-08T11:21:32-04:00

1970's Model Lagun FT-1 Vertical Milling Machine With Accesories.
Also For sales a Metal Lathe. Machines used for machining & fabricating Metal Parts. $6500 for both or will seperate.
(850) 508-2480

Craftsman 3/8" Mini-T 3.2amp Compact Drill with case (Tallahassee) $140

2008-10-08T06:55:04-04:00

Craftsman 3/8" Mini-T 3.2amp Compact Drill with case.

http://www.justools.info (cut and paste url)

Thoromatic 20" high speed 2000 RPM floor buffer (Panama City, Fl) $600

2008-10-07T11:12:18-04:00

This is a used but well working machine. I am selling it to clear up some space on my sales floor. I believe it cost somewhere around $1200.00 when it was new. I will not turn down any serious offer. The buffer can't be shipped and has to be picked up locally. This will also allow you to test it before you buy it. Contact Marcus at 850-747-0011 anytime between 9am-6pm Monday through Saturday.

Trencher (N.W. Tallahassee) $850

2008-10-06T15:04:48-04:00

New honda motor...Ideal for cable, wire, or irrigation systems...will trench 9 inch deep by 3 inches wide...second blade will trench 12 inches deep by 4 wide...

Gas Blower/Vacuum 205mph (Tallahassee) $65

2008-10-06T13:31:13-04:00

Craftsman 2 Stroke blower/vacuum c/w leaf bag and suction tube. Works great! - hardly used.

snap-on, mac and matco tool boxes for sale (tallahassee)

2008-10-06T12:52:55-04:00

I have 4 remaining tool boxes. 1 snap on 1 mac tools and 2 matco. the snap on is a top chest, the mac is a 9 drawer side hanger(limited edition) and the matcos are a side hanger and a roll around chest. If you have ever bought these brands you know how they can break the bank. I will make you a sweet deal.(850)508-6472

New Tool Box For Pick Up Truck (Tallahassee) $225

2008-10-06T10:18:07-04:00

This is a new deep dish flush mount tool box for a full size pick up truck. Will sell or trade for a full size tool box for a fifth wheel. Call Lucy at 850-509-0091. MUST GO!

Like New 10,000 amp industrial generator (Quincy, FL) $1500

2008-10-06T08:13:14-04:00

Like new (less than 16 hrs run time) Coleman Powermate 10,000 amp generator; we need smaller unit, includes 50amp outlet for dryer/stove, run small house. Excellent condition. Purchase price $3,500 in 2005, well-maintained but rarely used.

Black and Decker Radial Arm Saw (N.W. Tallahassee) $50

2008-10-05T19:12:11-04:00

Black and Decker Radial Arm Saw 10" blade with stand.
Good condition. $ 50.00
call 562-5488

Craftsman Radial Arm Saw (N.W. Tallahassee) $75

2008-10-05T19:10:53-04:00

Craftsman Radial Arm Saw 10" blade, with stand.
Good condition. $ 75.00
call 562-5488

sandblast cabinet (woodville,fla.) $50

2008-10-05T15:46:41-04:00

has extra plastic window, extra nossles for gun. cabinet in good shape, needs hose replaced. little use been sitting up. no sand. david at 850-421-3321

router and table (Northeast) $30

2008-10-05T10:05:56-04:00

Crafstman router and table for sale. Older but works.

Pressure Washer for Sale (Tallahassee) $400

2008-10-04T21:32:56-04:00

11 HP Honda Pressure Washer with a 3500 PSI Cat Pump Working Condition, gear driven. comes with 200 ft of hose and 2 wands, email me or call Craig at 850-694-2323 for more information

MITER SAW .......DELTA 12" (marianna) $50

2008-10-04T17:07:32-04:00

Compound Miter Saw. 12" DELTA. Works great. Blade needs sharpened.

MAKE ME AN OFFER!!!!!!

TILE EQUIPMENT (panama city beach,fl)

2008-10-04T11:12:40-04:00

mk rail wet saw - 300.00 imer rail wet saw - 350.00
clark floor machine - 350.00 60 lb. dewalt chipping hammer - 250.00
job box - 100.00

AllTrade 5 Speed Drill Press D513N 1/2" Chuck 1/3 (Tallahassee) $50

2008-10-04T07:24:29-04:00

AllTrade 5 Speed Drill Press with 1/2" chuck (1/3 HP)
Model: 1960-D513N
Works great, 1 handle is missing.

http://www.justools.info (cut and paste url)

Milwaukee Hand Truck/Dolly (NW Tallahassee) $30

2008-10-03T08:35:59-04:00

Milwaukee Hand Truck/Dolly

600lb Rating. Used twice. Pipe insulation is taped on to avoid scratches, but can be removed.

Tile Cutter QEP 13" Maestro Titanium Coated Cutting Wheel (Pedrick Road) $25

2008-10-02T20:25:03-04:00

Like new in box 13 inch Maestro 13" Tile Cutter. 7/8 inch cutting wheel is coated with TITANIUM. Cuts wall and floor tile up to 13" square and 1/2 inch thick. Dual Chrome-plated, Rugged steel rails with bumpers (5/8"diameter). Oversized, adjustable measuring gauge (English and metric). High Strength, Die cast Aluminum Alloy Base. High level handle.

DeWalt 16" Radial Arm Saw - Industrial Model (Tallahassee) $1000

2008-10-02T13:34:35-04:00

This is a large commercial grade 220 volt 3 phase radial arm saw. This thing is big enough to cut a tree. It is made of forged cast iron and weighs a ton. The table, stand, legs and 7 1/2 hp motor are in excellent condition. Again, this saw is heavy duty to say the least. Call Tom 933-1105

Paslode Framing Nailer (Killearn Estates) $235

2008-10-02T12:37:43-04:00

Paslode framing nail gun. Includes case, charger, battery, fuel cell,regular tip and no-mar tip. This tool has been used very little and is in great condition as can be seen from the picture. Also check out http://www.wickiwacki.com for other things I have for sale.

Delta Scroll Saw (Killearn Estates) $125

2008-10-02T12:29:22-04:00

This is a very nice Delta 16", 2 speed Scroll Saw. This is perfect for hobbies and crafts where a precision saw is required.This saw has an adjustable tilt table, Quick set II blade chuck, 2" depth of cut, Built-in air blower, Blade tension control, Includes blades. Check out http://www.wickiwacki.com for other things I have for sale.

5 NEW SOG "TWITCH II" Tactical folding knives (tallahassee) $250

2008-10-02T11:18:54-04:00

SOG "TWITCH II" Tactical folding knife

http://www.sogknives.com/store/TWI-8.html

Retail value for all 5 new knives is over $350, sell for $250

blades are virgin

Ryobi Chop Saw (Tallahassee, FL) $50

2008-10-01T11:06:45-04:00

Ryobi compound mitre chop saw with extra 12' blade. Laser light not working.

Air Compressor and Band Saw (Crawfordville)

2008-10-01T11:06:26-04:00

36" Hydraulic Band Saw - $500.00. 180 psi, 3 phase, Quick Recovery Air Compressor - $800.00. BOTH FOR $1,000.00 OBO.

Boots for Tree Climbing (Crawfordville) $150

2008-10-01T11:05:20-04:00

Hoffman's Size 7D. Leather. Steel Toe. Vibram Sole. Worn 3 times. Paid $287.00 - make offer.

6 Drawer Snap On Tool Box (S. monroe) $250

2008-09-30T16:35:49-04:00

6 Drawer Roll around Snap on Tool box With Wooden Top. 850-879-5355 Pics upon request jeremy.tapscott@gmail.com

Tecumseh Pressure Washer Commercial MUSTSELL BY WEEKEND!!!!!! (Tallahassee) $175

2008-09-30T15:00:21-04:00

Its a Tecumseh Motor 10hp Commercial /Industrial Xtra life ,3000 PSI 3.5 gal per min with a total of 10,500 cleaning units runs and pumps great no hoses or wand goes with it MUST sell by weekend so please don't hesitate to offer a price I just might take it first real decent offer takes it

Generator - 8000 watt - Commercial Grade (Tallahassee) $1400

2008-09-30T14:45:39-04:00

Titan - Commercial/Industrial grade - 8000 watt gas generator. This generator is new with less than 1 hour of use. It will power your entire home. Cost $3,200, but I need to sell it - only asking $1,400. Tom 933-1105.

Rear Axle Bearing Puller Set (NE Tallahassee) $20

2008-09-30T10:06:37-04:00

MAC Tools Bearing Remover Set, Model PRAB7494A, for sale. This set comes with a case and is in great condition. I bought a whole toolbox of tools from an auto mechanic, and this came with it. Unfortunately, I am not an auto mechanic, so I don't have any use for this set. If interested, or if you have any questions, please respond to this ad and I will get back with you as soon as possible.

Telescopic Leak Detector w/ Mirror (NE Tallahassee) $10

2008-09-30T09:52:09-04:00

Blue MAX Plus Telescopic Leak Detector with Adjustable Service Mirror for sale. In new condition. Comes with case, UV Inspection Glasses, and an Inspection Mirror that attaches to a telescoping high-intensity UV lamp. Use with florescent dye additive that can be purchased at any auto-parts store. (dye not included) If interested, or if you have any questions, please respond to this ad and I will get back with you as soon as possible.

CRAFTMAN TABLE SAW (TALLAHASSEE) $100

2008-09-29T16:57:59-04:00

Antique table saw all cast and forged parts-complete with rip fence. At least 40 years old. Not Junk! Needs a motor. Jessie @ 850-877-3555-jes32314us@msn.com

Craftsman 10" Table Saw, Last of the US Made (Tallahassee) $175

2008-09-28T15:33:40-04:00

Craftsman table saw from 1956 in perfect shape. Model 113.29990, cast iron table and extensions, custom fit with cast iron Model 99-2954 single pedestal stand, 3/4 HP 3450 rpm motor, dual belt drive.

INCLUDES two carbide blades, two chrome moly blades, blade wrench, Blade Loc tool, dado insert, Milford dado set, 8" sander/planer, 10" sanding wheel and disks, original manuals. This model may be the last of the US made Sears saws, a lifetime tool.

work bench (tallahassee) $30

2008-09-26T13:41:05-04:00

i have three very nice,solid wood work benches for sale,located on N.E. Capital Circle
$30.00 each
4'x8'Contact james @ 850-519-5096

Speedflo PowrTex 600DD Texture Rig (Never Used) $850

2008-09-25T20:34:45-04:00

Paid $1500.00 for it at a discounted price about two months ago.I never had a chance to used it which is why im getting rid of it. Let me know
carey.paint.inc@live.com

CapSpray CS9100 H.V.L.P Paint Sprayer $300

2008-09-25T20:18:11-04:00

Its a 4-Stage turbine.Ive only had it for a couple of months, never had any problems with it. Let me know
carey.paint.inc@live.com

KOBALT PORTABLE MIXER (Tallahassee) $225

2008-09-25T15:53:53-04:00

4 cu.ft. Multi Portable Mixer
1/2 HP Electric Motor
Excellent Condition
Bought New March 2008
Only Used on One Small Job

Call Skip @ 850-509-6132

GRIZZLY INDUSTRIAL DRUM SANDER (TALLAHASSEE) $775

2008-09-25T14:27:02-04:00

Like New 16" Drum Sander
Excellent Condition used Very Little.
Instruction Manuals Call Skip @ 850-509-6132

Multiple Wrench Sets (NE Tallahassee) $60

2008-09-25T08:02:27-04:00

EASCO 21 Piece Wrench Set (19 actually there)
Chesco 12 Piece Alan Wrench Set
Duro Closed end Wrench Set
12 Piece Combination Wrench Set

Contact Derrick 850-597-7240

Cash and carry.

Multiple Size metric socks 32 total (NE Tallahassee) $45

2008-09-25T08:01:52-04:00

Many sized, LARGE, good for diesel engines.

Contact Derrick 850-597-7240

Cash and carry.

4000 LB Hydraulic Floor Jack (NE Tallahassee ) $20

2008-09-25T08:00:25-04:00

4000 LB Hydraulic floor jack, works great. Sold truck do not need anymore.

Contact Derrick 850-597-7240

Cash and carry.

Woodworking Tools (NE Tallahassee) $500

2008-09-24T14:41:30-04:00

Numerous woodworking tools for sale, all need work:

40's-50's Sears Craftsman Cast Iron:
4" jointer, needs rust cleaning and motor
(2) 8" Table saws, need assembly, fence and motors
12" Bandsaw, needs rubber tires, motor

80's-90's Craftsman:
10" Radial Arm Saw built into nice big workbench, needs nothing
Small 3 wheel bandsaw, needs nothing
10" contractor table saw, needs stand, rusty table cleaned, assembly

Older cheap Dewalt (Black and Decker) 8" Radial Arm Saw on stand -needs nothing

I don't have time to sell these individually, so all or nothing, or take what you want and the rest goes to the dump - $500 either way

I'll deliver for free

545-9663

Shopsmith MarkV 5-in-1 Woodwork machine (Downtown) $600

2008-09-24T13:16:15-04:00

Hi,
I am selling a Shopsmith Mark V woodworking machine from approx 1984, it is a 5 in 1 unit that can be changed from a table saw, lathe, drill press, disc sander, and horizontal drill and comes with the adapting parts for these tools. It also accepts many attachments available separately such as joiner, jig saw, band saw, belt sander, biscuit joiner, dust collector and many more. Please see www.shopsmith.com to see the true versatility of this machine. This machine works well and I have completed many projects on it using the lathe and table saw. I have only had this machine for about a year and truly would love to keep it in my workshop but I could use the money more. These machines keep their value very well, check ebay for Shopsmith Mark V and you can see what I mean, I am willing to look at all reasonable offers. This unit performs well but can use some TLC such as oiling the sliding tubes, motor, and any working parts. I have used it as is for the past year since I havent found the time to clean and grease it. The pictures attached are bad, with a little elbow grease this machine will run strong for another 20 years. This comes with many additional parts and peices such as lathe tools, dado blades, table saw miter guide, most of these have only been used by me (some not even by me!) since the original owner and the one before me barely touched this machine. Please email if you are interested in coming by to take a look. Thanks!

old generator (tallahassee) $650

2008-09-24T08:26:12-04:00

Mongomery Wards powerlite electric plant. Made by Onan, model # W2C12004 in the late 1930's through the late 1940's. Crank and electric start. Cash only. 850-510-9686

Hilti TE- 6C COMBO DRILL AND CHIPPING GUN -ALMOST NEW (Tallahassee) $150

2008-09-23T09:41:03-04:00

THE DRILL IS BASICALLY NEW WAS USED VERY LIGHTLY. COMES WITH CASE AND MANUELS AND KEYED CHUCK..

www.allpowertools4less.com(cut and paste url)

10" miter table-top saw - new condition (tallahassee) $45

2008-09-22T14:32:30-04:00

Barely-used electric saw. Call Mike 451-5793

Keller Aluminum Ladders (8' step, 16' extension; will sell separately) (32312 (Timberlane/N. Meridien)) $100

2008-09-22T09:49:26-04:00

These two ladders are dusty from being in the garage and bear the usual paint splatters, but are in excellent condition. If bought together, $100

Keller Model 3116 16' Aluminum Extension Ladder, Type III, 200 lbs. duty rating: $45 if bought separately.

Keller Model 928 8' Aluminum Step Ladder, Type II, Green Line Commercial, duty rating 225 lbs.: $70 if bought separately.

CASH ONLY

HomeLite leaf blower for sale

2008-09-21T15:25:40-04:00

I have a used blower for sale. It normally works but I pulled the string out and don't have the patience to take it apart and fix it. I am looking to get $50 for it. That is the only problem that I know of....

Send me an email if you are interested

New Tiller (Monticello Florida) $500

2008-09-21T11:36:37-04:00

Tiller was bought last summer. Used less than 3 hours. Paid more than $800 for it. Sacrifice for $500 cash due to divorce. 386-623-5288.

Gas Generator - 8000watts - Commercial Grade (Tallahassee) $1500

2008-09-21T10:47:00-04:00

This generator will practically power your entire house. It is new and cost $3,200, but I need to sell it. It is a heavy duty commerical grade generator that is built to last.

Craftsman Blower For Sale (NE Tallahassee)

2008-09-20T22:59:55-04:00

I am selling my blower... it recently died and I changed the spark plug (it still fires but I think the compression is low. Somebody who works on small engines may be able to fix it or use it for parts. I kept it in good condition. It is really a work-horse (when it is in working condition) and it is very easy to start, which I miss. It is less than 2 years old.... and I had to buy one in the meantime... so I don't need two.

Best offer gets her.... send me an email with an offer. My loss could be your gain...

Painting Equipment (Tallahassee, FL) $125

2008-09-20T19:29:46-04:00

SCAFFOLDING
1 Person, 250 lb. capacity, 14" W, 8" closed; 2" rail depth; aluminum scaffold telescoping plank, heavy duty industrial 250 lbs., 8-13�x 12� wide. $125.
Cash only. Call 850-509-8825, leave message.

Electric car buffer / polisher (SW Tallahassee) $20

2008-09-20T18:04:53-04:00

110V OEM Industrial car polisher buffer. In good working condition. A one-time expense that is still cheaper than paying someone else to wax your car...or you can make afew bucks with it yourself.

All proceeds go to www.rideforfatherhood.org, an advocacy group that supports more active relationships between children and fathers by promoting active and responsible fathering.

Email at gene@rideforfatherhood.org or call 850.284.3677

paint sprayer (tallahassee) $250

2008-09-20T17:27:05-04:00

sprayer plus accesories, good condition. my phone number is 850 -284-3274

Aluminum Ladder...Werner mod. 376, six foot (Tally) $80

2008-09-20T17:11:49-04:00

Nice Werner extruded aluminum model 376 six foot ladder. Great condition, a little dust. http://www.discountofficeitems.com/werner-stepladder-376-ladder-wer376-office-products-28586.html?ref=froogle just like this, but with a 250lb limit. Asking $80, call (850)322-2295

Northern Tool & Equipment 2-Ton Manual Chain Hoist (Tallahassee) $40

2008-09-20T16:17:23-04:00

This hoist is new in box, and retailed for $89.99.

"Northern Industrial Manual Gear Chain Hoist � 2-Ton:
This hoist is designed using the latest technology and manufactured with quality materials at a price you can afford. In fact, you could spend twice as much and still not get as good a hoist. Hooks are drop forged for strength and long life. Total lift of 10 feet***
Lift Capacity (tons): 2,
Required Head Room (in.): 14,
Lift Chain Diameter (in.): 5/16

AMMCO "the Big Boy" 4000 series Industrial Brake Lathe (Bristol) $3000

2008-09-20T15:25:22-04:00

Same features as the new model but at HALF THE PRICE!! Includes drum & rotor cutting attachments & all adapters applicable to all passenger cars, light trucks & utility vehicles. Includes lathe, heavy duty stand, work light & chip tray. Will deliver, setup & demonstrate usage for an additional $100.00.. Excellent for production work & high volume service. Serious inquiries ONLY please!! Contact Jason @ (850)643-7618 or strick9961@yahoo.com with all questions..
PAYPAL OR CASHIER'S CHECK/MONEY ORDER ONLY... ABSOLUTELY NO PERSONAL CHECKS!!

TWO (2) GAR BRO concrete buckets {each priced seperately} (Carrabelle, FL) $500

2008-09-18T02:36:31-04:00

FOR SALE

Two (2) Used �GAR BRO� concrete buckets

STYLE 496-L

NEW $ 10,740

SELLING $ 3,500

"L-Series" Lightweight Laydown Buckets
Vertical Discharge Type (15" x 22" Clamshell Gate)

Specs for item # 496-L
Rated Capacity 3 2/3 Cubic Yards

STYLE 427-R

NEW $ 3,235

SELLING $ 500

"R-Series Lightweight Round-Gate Buckets
with 16" Diameter Gate

Specs for item # 427-R
Rated Capacity 1 1/2 Cubic Yards

CONTACT INFORMATION:

Alvin Howard
850-591-5899
850-697-4080
Ahoward697@aol.com

Table Saw (Havana,FL) $40

2008-09-16T21:19:58-04:00

Vintage table saw. Very heavy. Operational. Serious inquiries only. Call anytime during daylight hours (850)251-2619.

220 Volt AC Welder by Century 230 AMPS (Quincy,Fl) $250

2008-09-16T18:33:30-04:00

Used one time
AC WELDER
made by Century
55-230 Amps
220 volt
$250.00 firm
call 850-442-6548 ask for Scott

Landscaping and Gardening Tools For Sale (Tallahassee)

2008-09-16T12:36:52-04:00

I am the owner of a small landscaping and lawn maintenance company in Tallahassee and I am downsizing to only lawn maintenance. Therefore, I am selling all of my landscaping and outdoor tools and equipment. All tools have been used but they still work great, just might need a little rinsing. Equipment is fully serviced and runs great. Most of it I bought from Home Depot. If you are wanting to start a small outdoor maintenance company or you have a garden project, these are the tools and equipment that will get you well on your way.

Tools being sold:
2 Landscape Axes $15 for both or $10 for individuals
2 Rigid Transfer shovels $15 for both or $8 for individuals
1 Rigid irrigation shovel $8
1 spade shovel $5
2 Tampers $10 for both or $8 for individuals
2 Bow rakes $10 for both or $6 for individuals
1 Utility broom $5
1 Rigid large metal leaf rake $15
1 Rigid posthole digger $15
1 Vigoro posthole differ $10
1 Werner 20' extension ladder $25 OBO
1 True Temper wheelbarrow w/ steel handles $25 OBO

Power Equipment being sold:
1 20" Echo Hedge Trimmer (like new, fully serviced, runs great!) $125 OBO
1 18" Echo Chainsaw (like new, fully serviced, runs great!) $125 OBO
1 Brute 2600 PSI Pressure-Washer w/ adjustable nozzle $100 OBO
1 Briggs & Stratton 2600 PSI Pressure-Washer, 50 ft. hose, detachable gun, & nozzles $100 OBO

I have to sell these tools and equipment as soon as I can. Someone wanting to buy all tools and equipment at once will be considered for a significant discount. Call me, James Flieder on my cell at (850) 544-8421 when you want to see them. For some reason, I'm not able to upload images of them, but if you are interested, I would be happy to send you digital photos of them. I am self-employed so the hours when I can meet you are flexible. Take care!

RIDGID 10 In. Cast Iron Table Saw (Tallahassee) $400

2008-09-16T12:19:07-04:00

RIDGID 10 In. Cast Iron Table Saw

Only used to cut 5 sheet of 3/4 plywood
I have no need for it anymore it just taking up space

Comes with new smooth cut blade also!

This table saw comes with the Herc-U-Lift mobile base that provides easy transportation with a single push of its pedal, such convenience you won't find easily in other table saws. Also, its powerful 1-1/2 HP TEFC (Totally Enclosed Fan Cooled) induction motor that keeps dust and debris out of motor for extended life

Rugged and precise rip fence design with micro-adjust 36-in rip capacity for ripping wider material.
Cast iron table extensions with clamping surface allows jigs and featherborads to be clamped in lace easily.
Tool-free blade guard. Up front controls for easier access.
40 Tooth carbide blade for fast ripping and smooth crosscuts. Ind-I-Cut alignment disc.
MFG Brand Name : RIDGID
MFG Model # : TS3660
MFG Part # : TS3660

Makita Tool Belt (tallahassee) $50

2008-09-16T08:12:30-04:00

Makita tool belt; brand new, still in package. Retails for $89.99. First $50 takes it! (928) 237-6627-- it's a AZ number but I'm in Tallahassee.

Near NEw Compressor trade or sale (tallahassee) $125

2008-09-15T23:41:49-04:00

As New Condition, perfect Compressor. Small Size 1 gallontank on hand truck, perfect for home shop or take to job site. I bought it for airbrush, but it is simply to loud... I need an airbrush specific compressor. One that can run indoor and not hurt the ears!!! OR TRADE ME YOUR BIG ONE WITH A BIGGER TANK... YOUR LARGE CRAPPY ONE FOR MY NEW SMALL ONE! Used about 2-3 hours at the most... Email me with questions.. your chance for good stuff not junk! Thanks

105 ft linemans truck manlift diesel 1977 condor lift (Ft Myers Fl) $12000

2008-09-15T13:45:23-04:00

was a Georgia power and light service truck. 105 feet up or 45 feet reach.
fiber optic lines in mast aux.hyd. pump operates from basket or ground.
May trade for ? could be a real money maker Andy 239 340 1806

60 ft TEREX man lift 4 WD 1998 diesel (FT Myers FL ) $18000

2008-09-15T13:38:59-04:00

great deal ready for work good tires new batteries prof. Maintained
have other equip. Andy 239 340 1806